Mellott 140 Scrap Shear System

                        Mellott 140 Scrap Shear System, S/N 140062. 12” wide, 20’ long vibrating conveyor feeds into shear powered by 20HP hydraulic power unit, reducing long material into short trim blocks for easy entry into hog or grinder. Mellott scrap shears use a simple low maintenance design to shear long pieces of lumber into short, easily handled lengths. The scrap shear’s standard configuration includes a 20’ long vibrating infeed conveyor and a 20 HP hydraulic power unit. The operator controls are located on the front of the shear and provide class 2 electrical protection. Standard controls consist of emergency stop buttons located on the panel face and on each side, power on/off, manual operation for up and down, and an automatic mode which cycles up and down. The hydraulic cylinder is a 6” bore double rod cylinder with an extend stroke adjustment. The knife blade is alloy steel mounted in a1 1/2” thick ram guided by machined Ryertex bars.

                        Scrap Shear Specifications:
                        Lumber Capacity--4”D x 11 1/2” W x 18’ L
                        Weight--3225 pounds
                        Cycle Rate--10 cuts per min. std./15cuts per min. optional
                        Frame--1” thick plate steel
                        Knife--S7 Tool Steel
                        Ram--1 1/2” thick plate
                        Guides--2” x 6” Ryertex Bars
                        Cylinder--6” Bore x 6” Stroke w/Extended 
                        Stroke adjustment
                        Valve--Hydraulic w/ separate pressure adjustment
                        Control-- Auto/Manual operation
                        Motor Controls-- 480V 3phase class 2 protected 
                        w/ 120V Controls
                        Piece Size-- 11” to 14” Long
                        Vibrating Conveyor Specifications:
                        Pan--Formed 3/16” plate steel
                        Springs-- Fiberglass
                        Drive--3 HP 1750 RPM TEFC
                        Power Source Specifications:
                        Motor--20 HP 1750 RPM TEFC/ 30 hp optional
                        Pump--Fixed Displacement Gear
                        Tank--50 Gallon
                        Filter and Hoses--Included with tank and Frame
                        Max. Operating Pressure--2000 psi
                        Current new price is over $40,000.  
                        Unit appears in excellent condition 
                        and will be tested and serviced.  See 
                        photos of Mellott 140 Scrap Shear System 
                        on our web site.  Inventory No. 11319.  
                        Located at our Portland, Oregon facility. 
                        For brochure click 
                        on View 
                        PDF View PDF
                        Mellott 140 Scrap Shear System

                        Click thumbnails below to view larger image:

                        Would you like more specific information?

                        Your Name: Phone Number:
                        Email Address: Fax Number:
                        Company Name: Address:
                        Are you a used equipment reseller?


                        Website Design & Hosting by Starbelly Designs